Epson Printer has a Red/ Orange LED Blink problem face everyone those who use this Epson printer. This is a simple problem for your printer, just download Epson Stylus Photo 1410 resetter and solve your Problem. Then Reset the flood and reset the security counter, breathing life into your printer back. The explanation behind doing this as indicated by Epson, is that your Ink Pads are full and need supplanting. I had an Epson printer reset under guarantee by an Epson merchant and the ink cushions were not supplanted. This implies all you truly need to spare your printer is the resetting programming. In the event that you have not as of now downloaded the program Epson Stylus Photo 1410 adjustment program.

Please read carefuly following all instructions, in order
to run this program without problems.

This program prefers that You have Windows installed on your PC.

RUN AdjProg.exe file. – A menu should be displayed:

To reset waste ink counter;
– choose Particular adjustment mode
– Maintenance
– Waste ink pad counter
– Place ticks in boxes
– Check
– Place ticks in boxes
– Initialization

Restart printer – Done!
That’ all!

How to Reset Epson Stylus Photo 1410 Printer:

  1. Turn on printer and connect USB cable
  2. Download Epson Stylus Photo 1410 Resetter
  3. Extract file
  4. Open AdjProg.exe – Accept
  5. Particular adjustment mode
  6. Waste ink pad counter – OK
  7. Give check box Main Pad Counter and Platen Pad Counter
  8. Click Check – OK
  9. Click Initialization – OK
  10. Finish and then close Epson Stylus Photo 1410 Resetter
  11. Turn off printer and then turn on back.

 

Communication error?
——————-
* Windows Users must run the program in Compatibility Mode:
Right-click adjprog.exe – select PROPERTIES
Go to Comptability Tab
Select Compatibility Mode
Then run the adjprog.exe program

* Make sure the printer is the only printer connected to the computer.

* Make sure to connect to computer using a USB cable
If the printer is networked – then it must be REMOVED from the network.

File size